PRODUCTS
NEWS
EUSPRAY ATOMIZATION SYSTEM



The fields of application atomizing – cooling system are the following:

INDUSTRY
Micro dust control
Smell control
Electric charge control
Industrial cooling
industrial humidifying
special application

FARM
Cattle
Pigs
Horses
Poultry
backpack reviews
BOTANY
humidifying greenhouse
best sunglasses
green wall
garden
CIVIL
Civil
Bar
Terrace
Restaurant

MICRO DUST CONTROL.
REQUIREMENT: excessive dust in the workplace and neighborhood, meet the requirements of the law 626 / ARPA.
SOLUTION: Spraying reduces the spread of airborne dust and improve health for those working in critical areas.

Sistemi di nebulizzazione - Abbattimento micro polveriSistemi di nebulizzazione - Abbattimento micro polveriSistemi di nebulizzazione - Abbattimento micro polveri

HOW WORKS:

The micro-spray application is the most effective way to eliminate the problem of airborne dust generated from handling or processing of industrial material, compared to traditional water systems such as sprinklers that produce droplets too 
Large for filtration or by air as the vacuum industry that cannot be placed in certain points or design reason or rof high cost of product/maintenance.
The micro droplets of water, in the form of very fine mist, have the ability to imprison and dropping to the ground dust particles, increasing the specific weight. For example: coal, wood, cement, steel etc. ..
The fog of micro droplets can remove particles of breathable  dust from 10 to 1000 microns.
The plant consists of a motor-pump high-pressure, S1 class, the water is pushed to the pressure of 80-100 bar, depending on the case, by a network of pipes, polyamide, copper and stainless steel  304 and from the nozzles which generate a mist with a drops metric average from diameter, depending on the type of powder to be killed, variable from 15 microns to 120 microns.

Advantages:
is the most valuable system, flexible in design and less expensive on the market today.
Ease of design for both new plants and in operation.
Are not created puddles on the ground.
Reduced consumption of water and is energy, low maintenance costs.
An effect of reduction of the electrostatic charges accompanies the cooling effect.

Disadvantages:
it is not suggest to use in large open areas especially if exposed to the wind, except for all those applications in which
must focus the fog in a single point: ex. the hopper.

Fields of work:
● Mining / quarrying
● Steel Mill / Foundry / Aluminum Refinery / Drawing mill
● Power Plants
● Cement works
● Manufacture of wood
● Ceramics
● Galleries
● Ports

Different applications are designed from EUSPRAY to solve the problem of airborne particles:
● "Direct to the source 'in all places where the machines produced dust during the processing of raw materials.
for example, hoppers, screw conveyors, mills, vibrating screens, conveyor belts, etc..
● "blind" to avoid spitting dust from collection boxes of ground material or to be machined.
● "Fog-fall": storage sheds for all materials first.
● “"Fog on the means of movement" as trucks, excavators, trains, etc..

Results obtained from the customer:
● Reduction micro-dust in the workplace.
● Research and development for a product customized to the needs of the customer.
● Reduces the inhalation of dust and the harmfulness to the airways high and low of a person.
● Reduced consumption of water which is energy.
● Low maintenance costs.



Odour abatement

Sistemi di nebulizzazione - Abbattimento odoriSistemi di nebulizzazione - Abbattimento odoriSistemi di nebulizzazione - Abbattimento odori



NEEDS : reduce the presence of unpleasant odors in the workplace.
SOLUTION : We can pinpoint the problem and improve the environment.

Fields of application:
• waste water purifiers.
• garbage storage centers.

Results obtained from the customer:
• Monitor and block the spread of odors.
• The micro mist ensures a better working environment, increases the feeling of wellbeing.
• Flexibility of design and installation system.
• Lower energy and low water.
• Low maintenance costs.


Industrial cooling

Sistemi di nebulizzazione - Raffrescamento IndustrialeSistemi di nebulizzazione - Raffrescamento IndustrialeSistemi di nebulizzazione - Raffrescamento Industriale

The data monitored at some companies, evaluated the course of a day's work from June to September, average temperatures are between 32-36 ° C within the production departments and warehouses. The increase in temperature is caused mainly by two factors:
• Machines / Robots in operation: the heat generated by the engines increases the ambient temperature.
• Greenhouse effect: when the structure of the building is not designed to generate a natural circulation of air.

NEEDS : reduce high temperature in work places.
SOLUTION : improves the working environment and productivity of workers, increasing attention.

Results obtained from the customer:
• The micro mist ensures a better working environment, increases the feeling of wellbeing.
• Reduces energy consumption.
• Reduce water consumption.
• Reduce cost of ownership.
• Reduce the electrostatic charges.


Special Applications

Sistemi di nebulizzazione - Applicazioni SpecialiSistemi di nebulizzazione - Applicazioni Speciali

Coolers for cooling liquid
Felling of Micro Powders Truck
Dust Abatement of loaders and hopper wagons



Brending Animals

Sistemi di nebulizzazione - Allevamenti animaliSistemi di nebulizzazione - Allevamenti animali

Cattle
The problem of heat during the summer season is known to all breeders. University studies show that the "heat stress" resulting in several diseases for the animal, the short, medium and long term.
The real challenge for farmers during the summer season, is to protect cattle from the heat. For the animal is in fact very important to maintain an optimal body temperature.
Is has been shown that, thanks to the cooling micro spray we can reduce the environmental conditions that generate situations of heat stress. The results obtained are of great interest and benefit, the lowering of the temperature wholesale led lights brings immediate benefit to the animal and it allows him to return to their natural cycle.

NEEDS : to increase productivity by reducing the efficiency of heat stress in cattle.
SOLUTION : evaporative cooling with electronic control - custom microclimate.

Results obtained from the customer:
• Cattle: milk + 13% during the summer.
• Cattle: increased fertility and longevity.
• Pigs: weight at the end of growth + 10%.
• Pigs: + 8% ingested food.
• Reduced consumption of water which is energy.
• Low maintenance costs.


Pigs
University research show that pigs are susceptible to higher temperatures, especially in the stables.
Thanks to micro-spray cooling we can reduce the environmental conditions that create situations of heat stress. The results obtained are of great interest and benefit, the lowering of the temperature brings immediate benefit to the animal and it allows him to return to their natural cycle.

NEEDS : to increase productivity by reducing the efficiency of the heat stress of pigs.
SOLUTION : evaporative cooling with electronic control - custom microclimate.

Results obtained from the customer:
• The micro spray does not wet the animal.
• Reduces heat stress.
• Increased food ingested by animals.
• Increase the health of pigs.
• Reduced consumption of water which is energy.
• Low maintenance costs.


Horses
In summer, temperatures are between 34-38 ° C inside the stables. These values may lead, for horses, for an increase in stress, decreased appetite, worsens the health of the animal and increases the presence of insects.
Thanks to micro-spray cooling we can reduce the environmental conditions that create situations of heat stress. The results obtained are of great interest and benefit, the lowering of the temperature brings immediate benefit to the animal and it allows him to return to their natural cycle.

NEEDS : High temperatures inside the stables during the summer.
SOLUTION : The micro spray without wetting the temperature decreases, improving the welfare of the animal.

Results obtained from the customer:
• The micro spray does not wet the animal.
• Reduces heat stress.
• Increased food ingested by animals.
• Increase the health of horses.
• Reduce the presence of insects.
• Reduced consumption of water which is energy.
• Low maintenance costs.


Poultry
Mortality from suffocation inside of poultry farming increases substantially during the summer season and many farmers are facing a serious problem that undermines their production and their investments.
Thanks to micro-spray cooling we can reduce the environmental conditions that create situations of heat stress. The results obtained are of great interest and benefit, the lowering of the temperature brings immediate benefit to the animal and it allows him to return to their natural cycle. The cost for installing the system, will prove a profitable investment in a short time that will benefit day by day while preserving the value of your holdings and, last but not least, the health of animals.

NEEDS : High temperatures inside the stables during the summer.
SOLUTION : The micro spray without wetting the temperature decreases, improving the welfare of the animal.

Feedback from customers:
• The micro spray does not wet the animal.
• Animals eat more, increasing the weight at the end of growth.
• Reduces heat stress.
• Reduction in mortality from heat and suffocation.
• Increase the rate of growth and reproduction.
• Reduced consumption of water which is energy.


Botany

Sistemi di nebulizzazione - BotanicaSistemi di nebulizzazione - BotanicaSistemi di nebulizzazione - Botanica

The humidification EUSPRAY is applied to all cultures that require an automatic control and constant humidity within certain range. The control of the correct moisture content in greenhouses is a fundamental prerogative for the yield and the growth of crops, with the aim to avoid dehydration of the plant.
The results obtained are of great interest and benefit, the programmed setting of moisture brings immediate benefit to the plant that maintains a constant development.

NEEDS : creation of optimal microclimate for growing under glasshouse.
SOLUTION : use the micro spray with a single controller to manage moisture, temperature and fans.

Results obtained from the customer:
• Increased productivity of the greenhouse.
• Maintaining humidity levels constant.
• Creating a microclimate in all seasons.
• Stream auto chemicals and nutrients
• Flexibility of design and installation system.
• Lower energy and low water.
• Low maintenance costs.


Green walls
The humidification EUSPRAY is applied to all cultures that require an automatic control and constant humidity within certain range. The control of the correct moisture content in greenhouses is a fundamental prerogative for the yield and the growth of crops, with the aim to avoid dehydration of the plant.
The results obtained are of great interest and benefit, the programmed setting of moisture and brings immediate benefit to the plant that maintains a constant development.

REQUIREMENT : creation of optimal microclimate for growing under glass.
SOLUTION : Use the micro spray with a single controller to manage moisture, temperature and fans.

Results obtained from the customer:
• Increased productivity of the greenhouse.
• Maintaining humidity levels constant.
• Creating a microclimate in all seasons.
• Stream auto chemicals and nutrients
• Flexibility of design and installation system.
• Lower energy and low water.
• Low maintenance costs.


Gardens
The micro mist EUSPRAY is also used to create special sets dimmed in the gardens.
Combining the light colored spray mists are generated colored to blend and enhance the scenic effect. The spray can repel insects by a simple physical principle: the fine mist washes the wings, this means an increase in weight and a reduction of the wing beat and consequently the impossibility of flying.

NEED : to enhance the gardens, to keep away insects.
SOLUTION : mist EUSPRAY is ideal for creating personal choreography and repels insects.

Results obtained from the customer:
• Improve the choreography of garden landscaping.
• decreased insects between plants.
• Stream automatic aromas.
• Flexibility of design and installation system.
• Lower energy and low water.
• Low maintenance costs.
• repels insects.


MISTING IN CIVIL

Sistemi di nebulizzazione - MICRONEBULIZZAZIONE NEL CIVILESistemi di nebulizzazione - MICRONEBULIZZAZIONE NEL CIVILESistemi di nebulizzazione - MICRONEBULIZZAZIONE NEL CIVILE

The process of misting should not be confused with that of humidification: in fact in the process of micro-spraying the liquid in question (usually water) does not change immediately its state of aggregation, it does not pass instantaneously into steam, but it has a first increase in interfacial area that separates the liquid phase from the gaseous one. Although in the process of micro-spray droplets may be very small, they have nevertheless of macroscopic dimensions, or their state of aggregation is a liquid, non-gaseous. On the contrary, during the humidification process the liquid is subjected to a phase change (from liquid to gas).
Although the theoretical treatment of the two processes is distinct,omega replica watches in practice the two processes can occur in sequence, so that their effects are additive.
The process of micro nebulization leads to an increase of the coefficient of heat exchange between the water and air, due to the fact that the interface between the two phases is greater the smaller is the diameter of the drops of liquid.
Once the drops are formed, may adopt measures a cooling process, due to the evaporation of the liquid.
The thermodynamic process to the base is an adiabatic transformation of the system, for which the total energy of the system does not change, but is only transformed. Essentially part of the energy present in the form of heat (called the latent heat of vaporization) is used for passing gas in the form of the water spray.
This physical phenomenon of cooling air had already been discovered and used by the ancient Babylonians in about 1700 BC when the Babylonian Empire reached the height of its splendor., in fact discovered that the water, slid as in a waterfall, created the very small particles (micro spraying effect) with appreciable cooling the surrounding air.

Sistemi di nebulizzazione - MICRONEBULIZZAZIONE NEL CIVILESistemi di nebulizzazione - MICRONEBULIZZAZIONE NEL CIVILESistemi di nebulizzazione - MICRONEBULIZZAZIONE NEL CIVILE

How work
The water taken from the aqueduct is filtered and pressurized to 100 bar.
Through the nozzles is formed a fine mist (0.01 mm = 10 microns, or by a liter of water are obtained more than 800 million particles of H2O) that remains suspended in the air and evaporates before falling to the ground.
This process removes heat from the environment, producing the same beneficial sensation of coolness that was approaching a waterfall before you get to the point of getting wet.

Micro spray

Why cools?
The water needs energy (= heat) to evaporate: the water comes has an average temperature of 12° C, atomized into micro-droplets at a pressure of 100 bar is diffused in the environment in the form of fine mist. If the air temperature is> 25° C the micro particles of water evaporating subtract heat from the environment thus making it more fresh.

Physics tells us that serve 2272 KJ to evaporate 1 liter of water, the same amount of heat can escape the environment around us.
Evaporative cooling can reduce the room temperature from a minimum of 5 ° C up to a maximum of 15 ° C.
This system works in nature for billions of years ourselves when we are hot, we sweat and the evaporation of sweat, we can maintain our body temperature nearly constant.

Why does not wet?
If we will throw a liter of water in the environment, this would fall inexorably to the ground, wetting and evaporating within a few hours.
The secret of this system is to reduce the water into fine droplets due to our special free passage of small nozzles.
Our product thanks to a sophisticated electronic technology and the accurate mechanical components and the careful study of fluid-dynamic nozzles, makes the process quick and efficient evaporation occurs and before the water can fall to the ground.

It is therefore essential work at very high pressures: the higher pressure, the smaller diameter of the drop. Serving almost 6.9 trillion of the spray droplets for micro equivalent of the amount of water contained in a puddle of water by 1 meter diameter.

http://www.youtube.com/watch?feature=player_detailpage&v=CbXIRC05gAA





Back to NEWSTop